DisasterPRO Restoration, a locally owned company founded in 2018 in Kent, WA, handles fire clean up across Kent, Renton, Tacoma, Fife and Seattle, WA. Fire clean up cost depends on scope. As national planning ranges, HomeAdvisor puts fire and smoke remediation for a home around $27,477 on average ($3,083 to $52,031), and homewyse starts interior fire cleaning at $8.67 - $10.84 per square foot. Neither is a company price.
National fire clean up cost ranges to plan with in the Kent-to-Seattle area
Fire clean up cost has no single price, so the most useful starting point for a homeowner in Kent, Renton, Tacoma, Fife or Seattle is a set of published national planning ranges. The figures below come from two national cost sites. They describe averages across the whole country and are not quotes from DisasterPRO Restoration.
Each figure measures a different scope, as its own source labels it, so the three numbers are not interchangeable. They should not be added together, and one should not be used to check another.
According to HomeAdvisor, "Fire and smoke remediation is essential for restoring your home and usually costs around $27,477 on average, within a normal range of $3,083 to $52,031." That is a project-level figure for fire and smoke remediation of a home. The same source states that "Smoke damage restoration typically costs between $200 and $1,200 per room." That figure is narrower: it is labeled as smoke damage restoration and priced per room, not per home.
According to homewyse, "In September 2026 the estimated national average cost to Clean Interior Fire Damage starts at $8.67 - $10.84 per square foot." That figure is labeled as cleaning interior fire damage only. Multiplying it by the affected floor area gives a rough ballpark for interior cleaning, but the label does not cover drying firefighting water, demolition or rebuild.
The real number for a specific home comes from an on-site look at the damage. DisasterPRO Restoration offers a free inspection with no obligation, which turns these national planning ranges into a scope written for the actual rooms involved.
| National planning reference | Source | Scope as the source labels it | Unit |
|---|---|---|---|
| Around $27,477 on average; normal range $3,083 to $52,031 | HomeAdvisor (Jun 20, 2026) | Fire and smoke remediation for restoring a home | Per project |
| $200 to $1,200 per room | HomeAdvisor (Jun 20, 2026) | Smoke damage restoration only | Per room |
| Starts at $8.67 - $10.84 per square foot | homewyse (September 2026) | Cleaning interior fire damage only | Per square foot |
What drives fire restoration cost up or down
Fire restoration cost moves with a handful of factors that any estimator will look at first, whether the home is in Kent or in Seattle. Understanding them helps explain why two fires that look similar from the street can produce very different bills.
Size and spread come first: one scorched kitchen wall is a different job from smoke that traveled through every room. Smoke and soot residue can reach beyond the burned area, into closets, cabinets and ductwork, and each surface adds cleaning time.
Water is the factor homeowners forget. Firefighting leaves water in floors, walls and sometimes crawlspaces, so a fire job can include a water damage job. DisasterPRO Restoration handles water extraction and drying, using commercial dehumidifiers and air movers and checking moisture levels daily until the home is completely dry. For the water side of the bill, see the guide on how much water damage restoration costs.
- Area affected: one room, one floor or the whole house
- How far smoke and soot traveled beyond the burn
- Water left behind by firefighting and how long it sat
- Structural damage to framing, roof or subfloor
- Materials involved: porous items like drywall, insulation and carpet are harder to save than hard surfaces
- Contents cleaning, pack-out or disposal
- Emergency board-up or after-hours response
- How much rebuild follows the clean up
Fire clean up vs. rebuild: how the bill splits
Fire clean up and rebuild are two different parts of a fire damage restoration bill, and mixing them up is a common reason homeowners misread an estimate. The national ranges above are labeled as remediation, smoke restoration or cleaning; putting walls, floors and cabinets back is a separate line of work.
DisasterPRO Restoration does both sides. The company does the full rebuild after damage, including drywall, flooring, paint, trim, fixtures and cabinetry, and its team brings 40+ years of combined remodeling experience to that work. The founders came from both mitigation and remodeling, so one company can carry a job from clean up to finished rooms.
The comparison below is general guidance on how the phases usually differ. The exact scope for any home is set during the inspection.
| Phase | Typical work (general guidance) | What changes the cost |
|---|---|---|
| Emergency response | Securing the home, stopping further damage | Time of call, access, size of the opening |
| Water removal and drying | Extraction, dehumidifiers, air movers, daily moisture checks | How much firefighting water and where it went |
| Smoke and soot clean up | Cleaning surfaces, removing residue and odor | How far smoke traveled, number of rooms |
| Demolition of unsalvageable materials | Removing charred or soaked drywall, insulation, flooring | Amount of porous material lost |
| Rebuild | Drywall, flooring, paint, trim, fixtures, cabinetry | Finish level and square footage replaced |
How homeowners insurance shapes fire damage out-of-pocket cost
Homeowners insurance often decides how much of a fire damage restoration bill the homeowner actually pays, so the claim deserves as much attention as the estimate. Coverage, deductibles and limits depend entirely on the individual policy, and only the insurer can confirm them.
DisasterPRO Restoration bills insurance directly and helps with the insurance claim. Direct billing does not by itself settle who pays what or when: the deductible, anything outside the policy and the payment terms in the work agreement still apply. Ask the insurer and the restoration company to explain those terms in writing before signing.
A few habits make the claim smoother, offered here as general guidance:
- Photograph and video every room before anything is moved or thrown away
- Ask the insurer in writing whether the policy includes temporary housing while the home is restored
- List damaged belongings with approximate age and value
- Keep every communication with the adjuster in writing or summarize phone calls by email
- Keep receipts for emergency purchases, lodging and meals
- Ask the restoration company to share its scope and photos with the adjuster
What to ask when comparing fire restoration estimates
Fire restoration estimates from different companies in the Kent, Renton, Tacoma, Fife and Seattle area can look far apart simply because they cover different scopes. Comparing them line by line, rather than by total, shows which bid actually restores the home.
Use the checklist below with every estimate. A company that answers clearly, in writing, makes the comparison fair. DisasterPRO Restoration states it is IICRC certified, which is one credential worth asking every bidder about.
- Does the estimate separate clean up, water drying, demolition and rebuild?
- Which rooms and square footage are included, and which are excluded?
- Is smoke odor treatment included, or priced separately?
- Is the water from firefighting included in the drying scope?
- How will moisture be measured and documented before walls are closed?
- Are contents cleaning, pack-out and storage in or out?
- Will the company bill the insurer directly, and what payment terms apply to the homeowner?
- Who handles the rebuild, the same company or a subcontractor?
- What industry certifications does the crew hold?
- What happens if hidden damage is found after demolition starts?
Fire clean up mistakes that cause rework and add cost
Fire clean up mistakes rarely save money; most of them push the work into a second round. The points below are general guidance, not a do-it-yourself plan. Safety steps after a fire belong with the fire department, the equipment manufacturer or a professional.
Painting over soot is the classic one. Residue left under new paint can bleed through and bring odor back, which means stripping and redoing the finish.
Closing walls too early is the second. Drywall and insulation that hold firefighting water need to be dried and verified before rebuild starts, or the job can turn into a mold job later. DisasterPRO Restoration also handles mold remediation, finding the source, containing the spread and removing it safely, but avoiding that step is cheaper.
- Painting or sealing over soot without proper cleaning
- Rebuilding before moisture readings confirm materials are dry
- Running heating or air systems before asking the restorer whether the ducts carry soot
- Throwing out damaged items before the insurer has documented them
- Scrubbing soot with household products that can smear residue deeper
- Hiring separate crews for clean up and rebuild without a shared scope
Step-by-step after a house fire in King or Pierce County
The order of steps after a house fire in King or Pierce County matters, because doing them out of sequence can mean documentation is lost or work has to be redone. The sequence below is general guidance for homeowners; every home is different.
DisasterPRO Restoration answers calls in person day or night and dispatches a crew immediately, and it takes 24/7 emergency calls in King and Pierce County. The company also serves Kitsap County.
- Wait until the fire department says the home is safe to enter
- Call the insurance company to open a claim
- Call a restoration company to inspect and secure the home
- Document every room with photos and video
- Have firefighting water extracted and drying started
- Agree on a written clean up scope and share it with the adjuster
- Complete smoke, soot and odor clean up
- Confirm materials are dry before rebuild begins
- Rebuild drywall, flooring, paint, trim, fixtures and cabinetry
Local practicalities for fire clean up from the DisasterPRO Restoration Kent office
DisasterPRO Restoration dispatches fire clean up crews from its office at 26921 40th Ave S, Kent, WA 98032, with a fleet of three trucks ready for any size loss. The company takes 24/7 emergency calls in King and Pierce County and also serves Kitsap County; Kent, Renton and Seattle are in King County, while Tacoma and Fife are in Pierce County.
The company's area pages name specific neighborhoods it serves: East Hill, Scenic Hill and Meridian in Kent, across Kent ZIP codes 98030, 98031, 98032 and 98042; Renton Highlands, Kennydale and the area near Gene Coulon Memorial Beach Park in Renton; and the Proctor District, Old Town Tacoma and McKinley Hill in Tacoma. Fire-specific details are on the pages for fire damage restoration in Kent, fire damage restoration in Renton, fire damage restoration in Tacoma and fire damage restoration in Seattle.
Firefighting water that runs below the floor matters for scope. The company works in crawlspaces as tight as 18 inches, so mention any water under the home when calling. The team speaks English, Portuguese and Spanish (Hablamos Español · Falamos Português), so families can describe the damage and the claim in the language they prefer.
Before rebuild work starts, confirm permit needs with the City of Kent, Renton, Tacoma, Fife or Seattle, depending on where the home is. DisasterPRO Restoration is rated 4.6 out of 5 on Google; the full list of services is on the DisasterPRO Restoration homepage, and the free, no-obligation inspection can be requested through the contact form. Having these details ready speeds up the first visit:
- Street address with ZIP code and neighborhood
- Insurance company name and claim number, if one is open
- Whether the fire department has cleared the home for entry
- Which rooms smoke reached and where firefighting water went, including any crawlspace
- Preferred language for the crew and the paperwork
Frequently asked questions
Who cleans up after a house burns down?
After a house burns down, a fire damage restoration company cleans up, usually working alongside the homeowner's insurance adjuster. In Kent, Renton, Tacoma, Fife and Seattle, DisasterPRO Restoration offers fire restoration, handles the water left by firefighting, and does the rebuild, including drywall, flooring, paint, trim, fixtures and cabinetry.
How much does it cost to remove smoke smell from a house?
The cost to remove smoke smell from a house depends on how many rooms the smoke reached. As a national planning range, HomeAdvisor states that smoke damage restoration typically costs between $200 and $1,200 per room. That is not a DisasterPRO Restoration price; a free inspection sets the real scope.
How long does it take to clean up after a fire?
The time it takes to clean up after a fire depends on the size of the damage, how much firefighting water must be dried, and how much rebuild follows. No fixed timeline applies to every home. DisasterPRO Restoration checks moisture levels daily until a home is completely dry before rebuilding.
How much does insurance pay out if your house burns down?
How much insurance pays out if your house burns down depends on the individual policy, its limits and deductible, and only the insurer can confirm the amount. DisasterPRO Restoration bills insurance directly and helps with the insurance claim; ask for the payment terms that apply to you in writing.
Dealing with water, mold or fire damage right now? Call DisasterPRO Restoration at (206) 880-1421 or request an estimate online.