DisasterPRO Restoration is a locally owned mold removal company founded in 2018 in Kent, WA, serving Kent, Renton, Tacoma, Fife and Seattle, WA. The company states it is IICRC certified and sums up its mold work this way: find the source, contain the spread, remove what's there safely, and work to keep it from coming back. Inspections are free with no obligation, and the team bills insurance directly.
What a Company That Removes Mold Actually Does
A company that removes mold does more than wipe away the spots you can see. Mold is a fungus that grows where moisture lingers. The real job starts with finding the water that feeds the growth and ends with putting the affected rooms back together.
Professional mold work is usually called remediation rather than removal. The goal is to bring growth back under control, take out materials that cannot be cleaned, and correct the moisture problem so new growth has less reason to return.
No honest company can promise that mold will never appear again. Mold spores are commonly present in indoor and outdoor air, so the focus is on removing the growth and the conditions that let it spread.
DisasterPRO Restoration lists mold remediation alongside water extraction, drying, sewage cleanup, crawlspace work and rebuild after damage. That mix helps on mold jobs, because mold can follow a leak, a flood or a damp crawlspace. One company can then handle the drying, the removal and the repairs instead of handing you off between trades.
How DisasterPRO Restoration Approaches Mold Removal
DisasterPRO Restoration describes its mold service in four parts on its website: "We find the source, contain the spread, remove what's there safely, and prevent it from coming back."
During a mold inspection, the team uses moisture meters and infrared cameras to look for hidden water intrusion and likely breeding grounds behind walls, under floors and in other spots you cannot see. The inspection is free, with no obligation, and the company provides a detailed written estimate after a thorough on-site assessment.
When mold follows water damage, the company's drying work uses commercial dehumidifiers and air movers, with moisture levels checked daily until the home is dry. After removal, the rebuild side covers drywall, flooring, paint, trim, fixtures and cabinetry, backed by 40+ years of combined remodeling experience on the team.
The steps below are general guidance on how professional mold remediation usually unfolds across the industry. They are not a line-by-line description of DisasterPRO Restoration's process, so ask the crew which steps apply to your home.
- Inspection and assessment: locate the growth and, more importantly, the moisture source feeding it.
- Containment: isolate the affected area with barriers so spores are less likely to travel during the work.
- Air filtration: filtered air equipment is often run while materials are disturbed.
- Removal: porous materials that cannot be cleaned, such as soaked drywall or insulation, are taken out.
- Cleaning: salvageable surfaces and framing are cleaned and treated.
- Drying and moisture correction: the structure is dried and the leak or damp condition is addressed.
- Restoration: removed materials are replaced and the room is finished again.
Mold Inspection, Mold Removal, Drying and Rebuild Compared
Mold inspection, mold removal, drying and rebuild are separate jobs, and knowing which one you need keeps the conversation with any company focused. Some homes need only an inspection that rules mold out; others need every phase.
Lab testing is a separate question. If you want air or surface sampling, ask whether it is part of the visit. The company's published inspection description focuses on moisture meters and infrared cameras.
| Phase | Question it answers | What usually happens | When you need it |
|---|---|---|---|
| Inspection | Where is the moisture, and how far has growth spread? | Visual check, moisture readings and infrared scanning | You notice a musty smell, staining, or you recently had a leak |
| Removal (remediation) | How is the growth brought under control? | Containment, removal of damaged materials, cleaning | Growth is confirmed or visible beyond a small surface spot |
| Drying | Is the structure dry enough to close up? | Dehumidifiers, air movers and repeated moisture checks | Growth is tied to a leak, flood or damp crawlspace |
| Rebuild | How does the room get back to normal? | Drywall, flooring, paint, trim, fixtures, cabinetry | Removed materials leave open walls, floors or cabinets |
What to Do About Mold Before a Mold Removal Crew Arrives
Mold you have just found calls for a few calm steps, not a weekend cleanout. The goal is to stop feeding the growth, avoid spreading it, and make the visit go smoothly.
Avoid scrubbing or dry-brushing visible growth, since disturbing it can release spores into the rest of the house. Do not paint or caulk over stains; covering growth hides the problem without fixing the moisture behind it. Keep fans from blowing across the affected area.
Bleach is not a full fix on porous materials like drywall, because it may not reach growth inside the material. Hold off on throwing away damaged items until you have photographed them for your insurance claim.
Mold can affect people differently, and some people are more sensitive than others. If anyone in the home has breathing problems or a weakened immune system, talk with a doctor. A restoration company deals with the building, not medical questions.
- Stop the water if you can do it safely, for example by closing a supply valve under a leaking sink.
- Take wide and close-up photos of staining, water marks and damaged belongings.
- Write down when you first noticed the leak, smell or stain.
- Close the door to the affected room and keep children and pets out.
- Clear a path to the area and to any attic hatch or crawlspace entrance.
- Move fragile or valuable items away from the access route, without handling visibly moldy items.
Where Mold Removal Companies Commonly Look in a Home
Mold growth follows moisture, so a mold removal company usually checks the rooms and cavities where water collects or the air stays damp. The list below is a starting point for your own walk-through before an inspection.
Smell alone is not a diagnosis. A musty odor is a reason to look, not proof of mold, and visible staining can come from other causes. An inspection with moisture readings narrows it down, and the mold remediation in Seattle page explains local service in that city.
- Bathrooms: around tubs and showers, behind toilets, under sinks and near exhaust fans.
- Kitchens: under the sink and behind the dishwasher and refrigerator water line.
- Crawlspaces and basements: DisasterPRO Restoration works in crawlspaces as tight as 18 inches.
- Attics: around roof leaks and where bath fans vent.
- Window frames and sills: where condensation sits on cold glass.
- HVAC systems: ducts and air handlers that carry moisture or dust.
- Laundry rooms: washer hoses, drains and dryer venting.
Mold Removal Cost: National Planning Ranges and Estimate Questions
Mold removal cost depends on the size of the affected area, where the growth is and how hard it is to reach. No DisasterPRO Restoration price is quoted on this page; the company provides a detailed written estimate after an on-site assessment.
The figures below are national planning ranges from published cost guides, not DisasterPRO Restoration prices. This Old House notes that cost varies "depending on the mold type, location, and complexity of the job."
For a fuller breakdown, see how much mold remediation costs. Coverage depends on your policy and the cause of the damage; the guide on whether homeowners insurance covers mold remediation walks through it. DisasterPRO Restoration bills insurance directly and helps with the claim.
When you compare written estimates from any company that removes mold, line them up on the same points:
- Which area will be contained, and how?
- Which materials will be removed, and which will be cleaned?
- What is the moisture source, and who fixes it?
- How will dryness be confirmed before walls or floors are closed?
- Is rebuild included in the same estimate or quoted separately?
- How will insurance billing and the claim be handled?
| Item | National planning range | Source |
|---|---|---|
| Professional mold remediation, whole project | $1,223 to $3,757; most homeowners spend around $2,368 | HomeAdvisor (Jun 19, 2026) |
| Per square foot | $10 to $25 per square foot | This Old House (03/11/2026); HomeAdvisor (Jun 19, 2026) |
| Crawl space | $500–$2,000 | This Old House (03/11/2026) |
| Furnace and air handler systems | $3,000–$5,000 | This Old House (03/11/2026) |
| Exterior of radiant heating systems | $1,500–$5,000 | This Old House (03/11/2026) |
Checklist for Hiring a Mold Removal Company in King and Pierce County
Hiring a mold removal company in King and Pierce County is easier with a short checklist you can run through on the first call. Each item below includes what DisasterPRO Restoration states on its website, so you can compare it with any other company.
Rework on mold jobs can come from a handful of avoidable mistakes: cleaning growth without fixing the leak, painting over stains, skipping containment while removing materials, and closing walls before the structure is confirmed dry. Ask how each estimate prevents those problems.
Commercial properties and contents packout or storage are not confirmed in the company's published information, so ask directly if you need either. Local details are on the pages for mold remediation in Kent, Renton mold remediation and Tacoma mold remediation. Confirm permit needs with your city before work starts.
- Certification: ask which certification the crew holds. DisasterPRO Restoration states it is IICRC certified.
- Source first: the plan should name the moisture source, not only the visible growth.
- Inspection terms: DisasterPRO Restoration offers a free inspection with no obligation.
- Written estimate: get scope in writing after an on-site assessment.
- Insurance help: DisasterPRO Restoration bills insurance directly and helps with the claim.
- Rebuild under one roof: the company rebuilds drywall, flooring, paint, trim, fixtures and cabinetry.
- Language: the team speaks English, Spanish and Portuguese.
- Availability: the company takes 24/7 emergency calls in King and Pierce County and also serves Kitsap County.
- Local roots: founded in 2018 in Kent by people who worked in both mitigation and remodeling, with an office at 26921 40th Ave S, Kent, WA 98032.
Frequently asked questions
What is the average cost to remove mold?
The average cost to remove mold, based on HomeAdvisor's national data (Jun 19, 2026), is around $2,368, with most projects between $1,223 and $3,757. That is a national planning range, not a DisasterPRO Restoration price; the company gives a detailed written estimate after an on-site assessment.
How much does it cost to professionally remove black mold?
The cost to professionally remove black mold has no separate sourced national figure here. General national planning ranges for professional mold remediation run $10 to $25 per square foot, and This Old House notes that price depends on mold type, location and complexity. A written estimate after an inspection gives your actual number.
How much does it cost to remove mold from a bathroom?
The cost to remove mold from a bathroom has no bathroom-specific sourced figure here. The general national planning range for professional mold remediation is $10 to $25 per square foot, so a small, accessible area usually sits lower than growth hidden behind walls or under flooring. An on-site assessment sets the real scope.
Can I remove white mold myself?
Removing white mold yourself depends on how much there is, what material it is on and whether the moisture source is fixed. A small spot on a hard surface is different from growth inside drywall, insulation or a crawlspace. Avoid dry-brushing it, fix the leak first, and get an inspection if it returns or covers a larger area.
Dealing with water, mold or fire damage right now? Call DisasterPRO Restoration at (206) 880-1421 or request an estimate online.